Assassin's Creed Belt Buckle

thingiverse

This is an assassin's creed belt buckle that you can wear. LINKS: The MatterHackers Controller:http://www.mattercontrol.com/ Go check out my new website: http://www.galacticgentleman.com/home/ If you liked this you might also like my other projects on my page.http://www.thingiverse.com/Outlandish_Gamer/about Did you like this design? If so make it your own! I have a blank belt buckle you can customize here --> http://www.thingiverse.com/thing:1943204 Would you like to be up to date on my new designs? Link to my Twitterhttps://twitter.com/?lang=en Have Fun and Print On! Print Settings Printer: Anet A8 Rafts: Yes Supports: Yes Resolution: Any Infill: 10-30% Notes: I highly recommend using Matterhackers mattercontrol 1.6 if you are controlling your 3D printer from your computer via USB connection. This program is free and easy to use and produces very high quality prints. I switched from Cura because I was having issues with the prints, However with this program I have had no problems what-so-ever even on longer prints. I also suggest using Elmer's glue stick or other glue sticks on top of tape on your printing bed; This helps a lot with bed adhesion. Disclaimer: I am not in any way affiliated with MatterHackers. They have a great software that I use on a daily basis. Link in the summery. Post-Printing This is how mine turned out with normal settings, However my print bed was not leveled prior to printing, that is why the face looks like it does. How I Designed This I designed the buckle first (I have a blank one you can customize here http://www.thingiverse.com/thing:1943204 ) using fusion 360 then I joined it with the logo I modeled off a canvas. Picture used for the canvas: http://www.crochetville.com/community/topic/149129-assassins-creed-pattern-for-logo/