Aune B1 Case

thingiverse

This is a Aune B1 headphones amplifier case that i designed in Autodesk 123D Design. There was none existing yet so i figured i would do one myself. I took the measurements based on the version 1 of the Aune B1 but there's very high chances that there's no physical difference on the Aune B1 version 2. If you ever print it out and try it on a version 2, let me know if it works or not. 3D Printer: Modified Anet A8 Nozzle: 0.4mm Speed: baseline 80mm/sec with lowered speed on outlines Slicer: Simplify 3D Material: AMZ3D Blue PLA Temperature: 205 deg celcius You'll find in this project the STL file to open in your slicer of choice as well as the original 123D Design model that i created. The result was good. The device was sliding easily in the case with just enough resistance to secure it. It wont fall off. It is also not complicated to take out as you can push the device through the bottom hole of the case and it comes out great. This is my first design and also the first thing i share on Thingiverse. I wouldn't be surprised that no one would look for a Aune B1 casing and that it is never used but if you do, i'll be happy to know about it. Here's a video of the Aune B1 in the case: https://vimeo.com/201504951 EDIT1: I have modified the model with the bottom port 2mm more to the side to allow for bigger Micro USB connector. The 123D file and the STL have both been updated. ETH: 0x40a6a19c00e0c9cd9dc43e4a3d094983653a3152 BTC: 1KoUkp6TpBYCKHa8LoYD1EiEiDW578ifbV