Auto Bed Leveling for Flyingbear P902
thingiverse
This is a modification of <a href="https://www.thingiverse.com/thing:1977568">Flyingbear-P902 -Auto Bed Leveling</a>. Self leveling system for P902 using microswitch and micro servo SG90. Youtube: https://youtu.be/o2aA72GWLic <b>The list of parts to print</b> 1 x P902 Level support 1 x P902 Level switch <b>Non-printable parts</b> 1 x <a href ="http://canbemake.ru/recommends/sg90-mikro-servo-dvigatel/">SG90 Micro Servo</a> 1 x <a href="http://canbemake.ru/recommends/microswitch/">Microswitch</a> 2 x M3x4 Screw 2 x M3 Washer <b>Firmware</b> Use attached MarlinRC8V10withAUTOLEVEL_enabled.zip or update parameters on your firmware: define NUM_SERVOS 3 define Z_ENDSTOP_SERVO_NR 0 define Z_SERVO_ANGLES {90,118} // <- (Ideal position for my case, depends on the mounting flap, if you have experience with arduino check the ideal position using arduino. The arm is in front of the nozzle) define X_PROBE_OFFSET_FROM_EXTRUDER 6 // X offset: -left + right [of the nozzle] define Y_PROBE_OFFSET_FROM_EXTRUDER 43 // Y offset: -front + behind [the nozzle] define Z_PROBE_OFFSET_FROM_EXTRUDER -1 // Z offset: -below + above [the nozzle] // <- set if the nozzle is too high to low
With this file you will be able to print Auto Bed Leveling for Flyingbear P902 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Auto Bed Leveling for Flyingbear P902.