Automatic cat feeder splitter (for "WOPET Automatic Cat Feeder" & similar)
prusaprinters
<h3>Printing</h3><p>The feet can print as-is with no raft or supports.</p><p>The splitter will need supports at the tips and under the mounting interface cavity. I have included a print file for the Prusa Mini that shows where these are.</p><h3>Installation</h3><p>You'll need to either:</p><p>a) Set the feeder on something roughly 35mm above the surface where the bowls are sitting</p><p>b) Print 4 of the foot design (which conveniently lift the feeder by 35mm) from this page and hot-glue them onto the 4 corners of your feeder</p><p>Then snap the splitter itself into the "accessory connector" (where the bowl that comes with the feeder is normally attached) and put two bowls in front of it.</p><h3>Customization</h3><p>I designed both of these parts with OnShape, and you are welcome to <a href="https://cad.onshape.com/documents/72ac76eb2235be1476e1aee3/w/157aad279e226983cf1d4dca/e/8ed4ac1b9d093f8d657369bf?renderMode=0&uiState=625cd778d68ae752b3bb6e0a">view and edit the CAD files</a>.</p>
With this file you will be able to print Automatic cat feeder splitter (for "WOPET Automatic Cat Feeder" & similar) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Automatic cat feeder splitter (for "WOPET Automatic Cat Feeder" & similar).