Avatar Gunship

thingiverse

This is a RC Avatar Gunship with a FPV camera. It'a powered by a 2800 mAh Lipo battery and I used a Spektrum control system. The camera is po750 mAh Lipo battery. For more fun you need the HobbyKing KK 2.1.5 Multiboard and two 10kg Digital Servos. It is a prototype and I'm still improving it. Up to now I haven't found the right adjustments on the Multiboard so that the Gunship is too shaky. Here is the video link:https://youtu.be/ypMPR_iwktY Instructions Print everything once, except (You may have to sand and drill some parts): Seitenruder Motorhalterung Servo Hebel Kuve 1 Kuve 2 You also need: Two “Hacker A30-12M Brushless Motor” Two ESCs “Xetronic 50A” One 2800 mAh Lipo battery Two "HXT 10kg Servo (metal gear) 55g / 10kg" (HobbyKing) One KK2.1.5 HobbyKing Multiboard Four bearings (Outer diameter: 22mm; Inner diameter: 10mm) aluminum bar (at least 50 cm long; Diameter 10mm) Alot of M3 screws (30mm long) and self-locking screw nuts (Sometimes you can use shorter screws) Eight M4 screws (40mm long) and self-locking screw nuts (They are on Top of the Gunship for the Servo1 and Servo 2) One Kamera with live broadcast and a 750mAh Lipo battery Two Three-Blade Propeller (9x7) Don't hesitate to ask if you have any further questions!