Avent Connected SCD923/26 mount

prusaprinters

<p>This model is inspired by the babyphone mount by Bosal:</p><p>A solution to mount the babyphone of a friend at bed.</p><p>I created the part from scratch to add the following features:</p><p>The <strong>edge of the bed </strong>is 20.5mm wide: easy…</p><p>Screwing the M6 <strong>without a tool</strong>: Use an M6x30 screw with a knob from “<a href="https://www.thingiverse.com/thing:713300">Nut Knob Generator” bei wstein</a>. I made several different types, when I created a <a href="https://www.printables.com/de/model/230679-m6-knob-for-music-stand">special M6 knob for a music stand.</a> The .stl file there is too big for this mount, but you can create a knob for your self easily!</p><p>Making the part <strong>easier to print: </strong>To make the upper part easier to print, I removed the mushroom-like pins. The must be glued in but you can print the upper part flat on the printer.</p><p>The mount itself can be printed upright with a brim, as shown in the picture.</p><p>…</p><p>After testing at the friends place here are some suggestions for further remixes. But the current design is already good enough, so I let it be.</p><ul><li>There is a 0.3 mm gap between the glued pins and the stand of the baby phone. Add some e.g. foam to the base to give it a nice squeeze and solid connection.</li><li>The angle of the plate is actually &nbsp;limited between looking straight down and 45degree down. Moving the pivot point up to the edge of the mount would allow any angle, including standing upright.&nbsp;</li></ul>