Axial AX24260 AE-3 Vanguard ESC Enclosure with 25mm fan mount v1.1

thingiverse

v1.0: I made this as an alternative to the stock ECS mount for the 1:10 scale Axial Yeti, it screws directly to the original location. You'll need 1 - 7mm x 25mm x 25 mm fan, 4 - M2x5mm self-tapping screws, and 4 - M2x10mm self-tapping screws(depending in the thickness of the fan you purchased) and 1 - 25mm x 25mm piece of 3M double sided tape to secure the ECS to the inside of the enclosure to complete the assembly. It is a working progress so I might be tweaking the design as I test it. v1.1: I increased the wall thickness to make it a bit stronger. I also changed the height on the mid section. Giving better clearance for wiring, screws, and the unit itself. Print Settings Printer: Prusa i3 mendel Rafts: Yes Supports: Yes Resolution: 0.12mm Infill: 100% Notes: Print with ABS/PETG for best results, PLA might warp/melt as the unit heats up from extended use.