Axial Capra Body Panels
cults3d
You are looking a Body Panels for your Axial Capra. You can print in either PLA or PETG. I recommend PETG if you are going to be in a HOT environment since the panels are nominally 1mm thick and can warp in extreme heat (inside a car in the summer) for extended periods of time. You will need a heat gun to soften the front of the roof and the middle of the hood once installed in order to shape the panel to the curves of chassis. If using PLA, it only takes about 8-15 seconds of heat; PETG, 10-20 seconds of hear. PLA softens at 180 f and petg at 230 f. I've included a winch line roof guide/roof rack as a free be to complete the look. The intended use allows you to run a winch line over the top of the truck and around the roof to flip yourself or side hill.
With this file you will be able to print Axial Capra Body Panels with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Axial Capra Body Panels.