Axial Ryft RBX10 - Castle Mamba X ESC Mount

prusaprinters

<p>A mount for the Castle Mamba X to the Axial Ryft RBX10.</p><p>You'll need 2 x M3x12mm to mount the holder to the truck. You'll want to continue to use the stock mount as this allow for zip ties to still be used. The mount should be friction fit, though double sided tape could be used if you want to leave yourself a little extra room when printing.</p><p>For the switch mount, you can use the stock screw that was used to hold the switch previously.</p><p><i>You'll want the logo to face the front of the truck</i>; you'll also need supports for both models to maintain a good hole for the punch outs in both areas.</p>