Axial Wraith Winch Fairlead

thingiverse

This is a simple fairlead for the Axial Wraith. Mainly applicable if using a servo winch setup. Designed around the stock servo on axle setup, I have not tested with a CMS setup, and I don't have any interest in putting CMS on my Wraith at this time. To use, I highly recommend drilling out the mounting holes on the wraith to 3.0mm. I don't recommend 1/8", If you don't have a drill bit, just use a 3mm screw and strip the hole out completely. There are 2 version. The first version is if you have removed the stock front bumper light buckets. The second version moves the fairlead back, and makes it more narrow to allow the use of the light buckets. You will need to change screws to mount this: No-lights: M3x8 Lights: M3x12 The screws will cut their own threads into the fairlead holes, DO NOT OVER TIGHTEN. If you are an extreme user feel free to use longer screws and locknuts.