Baby Bottle Holders (Dr. Brown's 4oz, 8oz & Breastflow 6oz)

prusaprinters

<p>I've created a few different bottle holders for my daughter's bottles and a friend's baby bottles. As you can see from the picture, I customized the design with her name, it's fairly easy to do in Tinkercad.</p> <p>Breastflow 6oz bottle has a 71mm holder.</p> <p>Dr Brown's 4oz bottle has a 54mm holder.</p> <p>Dr. Brown's 8oz bottle has a 61mm holder.</p> <p>All three designs go about 2/3rds of the way up the bottle. You most likely could use other bottles with these designs, which is why I include the holder sizes above.</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Wanhao</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Wanhao Duplicator i3 V2</p></div> <p><strong>Rafts:</strong></p> <p>Doesn't Matter</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>.2</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>.25</p></div> <p><strong>Notes:</strong></p> <p>The supports for the hearts are annoying and I was never get the hearts to come out perfect. I'm sure someone better with the slicer software and a better printer will be able to get them perfect.</p> <h3>Post-Printing</h3> <p><strong>Finishing up.</strong></p> <div><p>I tried doing the prints with printed handles, but I never liked the strength quality of the handles, so for my "production" models I went with fabric strap. The fabric strap is just a piece of fabric folded over a few times onto itself, each fold being attached with fabric adhesive and then I use Gorilla glue to attach it to the bottle holder. Gorilla glue expands so I just with a X-acto knife to clean off any excess.</p> I use a small file to go over all the hearts and stars opening to smooth them out. </div></p></p></p> Category: Household Supplies