Backyard Discovery Oakmont Swingset Door Latch

prusaprinters

<p>The little plastic latch that holds the door closed on our Backyard Discovery Oakmont swingset (<a href="https://www.backyarddiscovery.com/products/oakmont-wooden-swing-set">https://www.backyarddiscovery.com/products/oakmont-wooden-swing-set</a>) got broken so this a replacement part. It fits perfect and is twice as thick as the original so it should hold up pretty well.</p> <p>This might fit other Backyard Discovery wooden swingsets that have a door. The mating part is a 0.27"/6.88mm square recess, held in with a countersunk wood screw from the handle side that threads into the knob.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Folger Tech Prusa i3 2020</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0.2mm</p></div> <p><strong>Infill:</strong></p> <p>50%</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>Print with the handle facing up, supports are a must. Printed fine for me with Gizmodorks PLA at 195ºC with a 60ºC bed on blue tape.</p></div> Post-Printing ============= <p>Remove the supports and screw onto the original handle with the original screw.</p> <h3>How I Designed This</h3> <p>Designed in Inventor 2015, modeled after the original part but made thicker.</p> </p></p> Category: Outdoor & Garden