Omzlo PiMaster Case for Raspberry Pi 2 and 3 model B boards

myminifactory

This is a 2 part case for a Raspberry Pi with an Omzlo PiMaster HAT attached on top. It is designed to use the standoffs and screws included with the PiMaster and 4 screws M2.5x8 countersunk. 2 screw to the standoffs from the bottom on the 40 pin side and 2 screw from the top to the case to hold the cover in place (the top screws will form the threads on the printed case). No supports needed, just make sure your print settings for bridging result in clean bridges for the ports. I printed the cover in a translucent material so that the onboard LEDs on the PiMaster are visible. Please note that the latest Raspberry Pi 4 has a slightly different port layout, so this design is not (yet) compatible.In the future I will provide alternative versions compatible with the Raspberry Pi 4, enclosures for the CANZERO nodes and versions with extra mounting options for the shelves and containers I will be using for an IoT Arduino aquaponics project. So this is just the starting point of a much larger project. Comments/notes for the Craftbot competition: This is an IoT Arduino and Raspberry Pi platform. More information about Omzlo and the NoCAN platform can be found here: https://www.omzlo.com/ I am not affiliated at all with the company Omzlo. #ArduinowithCraftbot