Bally Chimes Pin - Spacer
thingiverse
This is a spacer / pin I designed for the Chimes units used in Bally electromechanical and early solid state pinball games. Normally, Bally used rubber grommets and brass bushings. Often, these are crushed and destroyed in the past by someone tightening the 5/16" nuts too much. I had a hard time finding suitable grommets which is the reason I designed this simple pin or spacer. You will need standard 5/16" rubber rings as well on which the bars will rest, each bar will need 2, 1 at each side. The rings will isloate the bars from the frame. Refer to the added pictures; that will hopefully make things more clear. Installation order: - Install 5/16" rubber rings - Install bars - Install printed pins/spacers - Install and tighten 5/16" nuts and washers
With this file you will be able to print Bally Chimes Pin - Spacer with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bally Chimes Pin - Spacer.