Barrel Cleaning Rod - Modular (Airsoft)

prusaprinters

<p>A modular, flexible airsoft 6mm barrel cleaning rod that can be disassembled for easier storage. When disassembled each section is exactly 20 cm long.</p> <p>Use soft cotton cloths cut to approx 1 x 2 cm (depending on the cloth thickness the mileage may vary) and pull it half way through the hole of the needle.</p> <ul> <li>Do not rotate the rod inside the barrel</li> <li><p>Let the cloth all the way through the barrel before changing direction (first push it all the way through, then pull it back all the way out) For a better print quality It is recommended to print split versions and glue the halves together.</p> <h3>Print Settings</h3> </li> </ul> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>I3 MK3S</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>No</p></div><strong>Resolution:</strong></p> <p>0.20</p> <h3> <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><ul><li>ABS or PET</li> Print split parts and glue them with super glue or acetone Cut threads on both sides using M3 thread cutter and a thread tap Post-Printing</ul></div></h3> <p>Make M3 threads on both sides using thread cutter and thread tap, and some silicone oil or grease.</p> <p>Even though I don't recommend that, if you don't have a tap &amp; die thread set, you can shorten the pin by 8 mm and (hope to) use friction to keep the parts together.</p> </p></p> Category: Sport &amp; Outdoors