BattleTrap Upgrades

cults3d

I've had these made for a while. but wasn't ready to share them. They are upgrades for BattleSlash/RoadTrap/BattleTrap. the double-barrel gun goes with RoadTrap and is based on the original gun from the G1 Duo-Con. the Gatling like gun with the pop-out handle is for BattleSlash this was made to be stored in the large port for combining. A part for RoadTrap that goes along with the double-barrel gun is a plug that will connect to the 3mm port on the back. the 3mm port is used for posing with a stand. but if your willing to give that up you can put the plug in and it will stay without glue and can be used for storing the gun in robot mode. the plug is designed to not interfere with the transformation. support material is required for every print in the download. when you go to assemble the gun for BattleSlash cut off some spare 1.75 filament and insert it into the hole. you may need to use a knife, drill, or tool to enlarge the hole USE CAUTION IF YOU DO THIS. you also may want to melt the end of the filament to the part or use a small dab of super glue. be careful to not glue the entire handle.