Beamer adapter arm - for Optoma (and others)
prusaprinters
<h3>Why</h3> <p>I was printing the excellent beamer-to-tripod adapter made by Klenzel: <a href="https://www.thingiverse.com/thing:2638768">https://www.thingiverse.com/thing:2638768</a></p> <p>However, the arms were too short to reach the M4 screwholes on my Optoma beamer. This bracket is designed to interface with his part, but increases the bracket length from 70mm to 94mm.</p> <h3>Features</h3> <ul> <li>Interfaces with Klenzel's tripod beamer mount</li> <li>Tested with an Optoma beamer, should work with most beamers that have their mounting holes spaced a bit more distant.</li> <li>Takes M4 nuts and bolts</li> </ul> <h3>Instructions</h3> <ul> <li>Print it with the flat side down</li> <li>.2mm is fine</li> <li>No supports needed</li> <li>Print slow and hot with plenty of walls/infill for optimal strength</li> <li>Beamers can get hot, so make sure you print in a temperature-resistant material just in case.</li> </ul> <h3>Open Source</h3> <p>As always the original design file (fusion360) is included, so feel free to improve it (or learn from it)!</p> Category: DIY
With this file you will be able to print Beamer adapter arm - for Optoma (and others) with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Beamer adapter arm - for Optoma (and others).