Bed Leveling/Calibration Test Pads

thingiverse

# Intent This print is designed to be used to test bed leveling. # Inspiration It was inspired by [pgreenland's remix](https://www.thingiverse.com/thing:34558) of bsutton's bed level test object. I printed it and decided that I wanted to add some features. After looking at the code, I decided to completely re-write it from scratch, which ended up being lots of fun. # Customizing I've had lots of fun cutomizing in the past, so I decided I'd make this one into a customizer as well. I'll upload a version with filleted corners at some point as well. __Unit System__ is self-explanatory and supports whatever units you have for your print bed (sometimes manufacturers give them in a variety of different units). The ones supported are mm, cm, and inches. Do note that all of your dimensions will be assumed to be in that unit system, so layer height and all of your other inputs must use the same system. It would be fairly trivial to modify the code to use inches for the bed and millimteres for the rest. __X__ and __Y__ are the dimensions of your bed. __Px__ and __Py__ are the number of pads in each direction. You can add as many as you'd like, just be aware that I didn't program this to save you from poor choices. __Edge__ and __Height__ are for the pad and do exactly what you'd expect. __Pn__ is the number of perimeters you'd like. Again, this program won't save you from your own poor choices. That being said, it could be very useful to print a single square with a ton of perimeters. You'd get a very good idea of how well your bed leveling was working. __Offset__ is the distance between the perimeter and the central pad and also the distance between each perimeter. __Width__ is the width of each perimeter. It is recommended that this be a multiple of your nozzle width. __Margin__ is the distance between the pads and the extremities of your beds.