Begode T4 Titan Armor

thingiverse

Update: 4/4/23: Added Moto X Phone holder for by request. Unfortunately, it will most likely not fit your phone. This phone mount will work with the Master Pro Riding Handle. Alternatively, I created my own riding handle with integrated phone mount: https://www.thingiverse.com/thing:5951508 Update 3/29/23: Added optional nose guard tip. Print in TPU and hammer it in to protect the nose guard and offer a soft landing for the nose kickstand. This is my remix of the T4 Fairing. I call it the Titan Armor for the Begode T4. Since the original master Titan Armor does not allow remix, you will have to grab the nose and tail grip from that listing: https://www.thingiverse.com/thing:5453902 Also, please grab the master riding handle from here: https://www.thingiverse.com/thing:5612903 Recommended Accessories: https://www.thingiverse.com/thing:5844288 https://www.thingiverse.com/thing:5438359 I use PLA but you may use stronger materials as needed. 15% and 3 or 4 walls are sufficient strength. TPU is ideal but it may not be necessary. I may add a TPU bumper for the nose later which should be sufficient protection. The top fairing will need to be flipped by the Y axis for the other side. The bottom fairing is the same for both sides. Note that it is designed to be used with the riding handle from the master pro handle. The Titan nose grip should either be scaled by the Y access to fit your printer or cut it in two to print and glue back together. The top and rear skirts should be mirrored by the Y access for the other side. If you use velcro for the fairings, you may want to add about 2-4mm to the X axis of the front grip so the front armor sits flushed with the fairings. Screws may be used for the back skirt and front grip, but I just use industrial strength velcro.