BFM Coaster (Dual Extrusion)

thingiverse

Bill Effing Murray! This is a dual extrusion print. I printed at .15 layer height and 30% infill Print Settings Resolution: .15 Infill: 30 Notes: For anyone using the flashforge creator pro and simplify3d, I use the following script to get much cleaner prints. Adds more time as it lets one side cool down upon tool change, but it's worth it. I printed in abs, so if you're printing in PLA you will have to adjust the temps.... Just go to process settings, scripts, tool change script and copy the following. ; Tool chance script start G1 X120 Y-70 F4000 ; Move out of the way while it stabilises active tool temp. {IF NEWTOOL=0}; RIGHT Extruder is active {IF NEWTOOL=0}M104 S160 T1; Cool inactive extruder to 160c (T1) {IF NEWTOOL=0}M104 S230 T0; Heat active extruder to 210c (T0). {IF NEWTOOL=0}M133 T0; Stabilise T0 temperature {IF NEWTOOL=1}; LEFT Extruder is active {IF NEWTOOL=1}M104 S160 T0; Cool inactive extruder to 160c (T0) {IF NEWTOOL=1}M104 S230 T1; Heat active extruder to 230c (T0). {IF NEWTOOL=1}M133 T1; Stabilise T1 temperature ; Tool chance script end