BG-12 Fire Alarm Pull Station Wall Mount (no need to damage drywall)

thingiverse

REQUIRES: x4 Drywall Mounting Screws no thicker than 4.2mm (slightly smaller or bigger may work) x4 Drywall Anchors for ^ screws (unless you somehow have perfectly placed studs) x4 6-32 X 1/2 Machine Screws with Nuts This is a wall mount for a BG-12 Fire Alarm Pull Station or similar. I've designed it with a spot for a wire from the pull station to feed out the bottom of the mount, and made it minimally invasive to your drywall by only requiring drilling 4 screws/drywall anchors into your wall, which can be repaired easily if you remove it. Compared to the large square hole you'd have to cut for the BG-12's wiring bracket that sticks out, this is far better. This is obviously meant for the hobbyist or nerd who wants a fire-alarm pull station in their house but doesn't want to tear up their wall or route wires through it.