Bike - Brake Cable to Shift Cable Clip - Side Entry
prusaprinters
<p>A clip to hold 5mm brake housing and 4mm shift housing together on your bike to keep things nice and tidy and rattle-free</p><p>If cables tend to pull away from each other, <a href="https://www.printables.com/model/296318-bike-brake-cable-to-shift-cable-clip-flat-front">a design like this flat front</a> may help keep them together.</p><p>Other filaments may work. I have tried 95A TPU and there was not enough rigidity with this design to reliably hold the cables. You could make the design thicker and may get TPU to work better than I did. I have not tested PLA, I would likely avoid standard PLA to avoid cracking. A PLA+ type material may be a good option.</p><p>Print Settings:</p><ul><li>PETG</li><li>100% infill (or enough perimeters to be solid)</li><li>No supports</li><li>print in a vertical orientation for strength</li></ul>
With this file you will be able to print Bike - Brake Cable to Shift Cable Clip - Side Entry with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bike - Brake Cable to Shift Cable Clip - Side Entry.