Biltema pegboard Ryobi sander pad holder

prusaprinters

<p>This is designed to be printed with 0.42mm line width! If you are using 0.4mm nozzle, then 0.42 is coming out great and making strong prints!</p> <p>Also included is 3mf -file, so you can open this in Microsoft 3D Builder and easily change wall locations, numering and screw hole locations.</p> <p>Holes are set for Biltema pegboard, put you can screw this to any surface, holes are 5mm in size.</p> <h3>Print instructions</h3><p>Put line width to 0.42mm. Use 4 walls, 4 bottom layers and 4 top layers. There are very small overhangs on lettering, but you don't need supports if you have cooling fan on. With 60mm/s it takes 14 hours to print and needs 55m of filament.</p>