Garmin GPS mount - later USB type for Skoda Citigo VW Up and SEAT Mi

prusaprinters

<p>This has been superseded by <a href="https://www.thingiverse.com/thing:3833402">https://www.thingiverse.com/thing:3833402</a></p> <p>This is a Garmin GPS mount for the later type fitting in the 2017 Citigo, Up and Mi which have a USB socket under the base. The neck has as a 17.2mm radius ball to match the standard socket on Garmin GPS brackets. There are two designs, a short neck for the 4" GPS, and a longer neck to provide more clearance for 5" and larger screens. EDIT - after more use i suggest using the longer design for all satnav sizes. I have used the clever spring clip design from XenoBlaster so it is all in one piece.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Prusa</p> <p><p class="detail-setting printer"><strong>Printer: </strong> <div><p>i3 MK3</p></div><strong>Rafts:</strong></p> <p>No</p> <p><p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div><strong>Resolution:</strong></p> <p>0.15mm but not critical</p> <p><p class="detail-setting infill"><strong>Infill: </strong> <div><p>20% but not critical</p></div><br/> <strong>Filament:</strong><br/> Various PLA <br/> <p class="detail-setting notes"><strong>Notes: </strong> </p><div><p>I suggest four perimeters to get better strength and stiffness. It will need supports. The ball may need a bit of sanding depending on how well dialed in you have the support interface but don't remove too much as it needs to be a tight fit.rnrnEDIT I found that the ball wears rather quickly in PLA, the quick fix is a light coat of PU lacquer which seems to provide a harder finish. Later versions I made in Carbon/PLArn</p></div></p> </p></p></p> Category: Automotive