Birdhouse

thingiverse

This is my entry for the birdhouse challenge. It is a double nest box design that should be easy to print and easy to assemble. The house has two nest boxes with openings at oposite sides of the box to allow two seperate nests. Both nests have holes in the base to keep the nests dry and both have an internal perch to allow the chicks to look out at the world. Instructions Print out the base then print out the top. lay the top over the base and screw in four 3mm self tapping screws. the box is now assembled. place the box in a high position. Mark the 4 holes on the wall where the box will go. Drill the 4 holes and place 4 wall plugs in the drillled holes in the wall. Screw the box to the wall.