Bit box, with springs and magnetic closure
thingiverse
Bitbox for 40 0.25" screwdriver bits. Each pocket has a spring that holds the bit in position. Size of the box: 107 x 82 x 30 mm Maximum length of bits is 27 mm. Print at least the lower part with PLA (with PET, the springs would be too weak). You will need two cylindrical pins with 0.1" diameter and 0.5" length (Zylinderstifte 2,5 mm Durchmesser x 10 oder 12 mm) and two magnets 5 x 5 x 5 mm. Magnets: When the two magnets can freely be rotated against each other, then you have the right orientation. Labels: Open, edit and print the SVG-file with **inkscape**. The forth row of pockets has no label, it is for replacement bits.
With this file you will be able to print Bit box, with springs and magnetic closure with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bit box, with springs and magnetic closure.