Black Snapper 3D-Gimbal for GoPro Hero3+

thingiverse

This is a 3D-Gimbal for the Black Snapper. It is designed to hold a GoPro Hero3 and to use with small Emax 1806 450kv motors. As controller board I use the Storm32 controller from banggood. The MPU fits perfect to the backside of the GoPro mount. I also use a protection lens for the GoPro so that you can add a ND-filter to avoid jello. There is a hole in arm_2 for the cables. I didn't put the cables through the hole because I tried different arms and didn't want to unplug the cables all the time from the board. Instructions Print every part once. I used about 80%-90% infill to be stiff enough Parts you need 1x Controller board: http://www.banggood.com/Storm32BGC-32-bit-Brushless-Gimbal-Control-Board-With-MPU6050-Sensor-IMU-Anti-interference-Module-p-996912.html?p=OF26119123132014119R 3x Motors: http://www.goodluckbuy.com/emax-gb1806-450kv-brushless-gimbal-motor-for-fpv-photography.html M2 screws: http://www.banggood.com/200pcs-M2-Allen-Bolt-Hex-Socket-Round-Cap-Head-Screw-Assortment-Kit-Set-Black-p-1041363.html?p=OF26119123132014119R 2x M3 screws: http://www.banggood.com/160pcs-Metric-M3-Black-Nylon-Screws-and-Nuts-Assortment-Set-p-973441.html?p=OF26119123132014119R M2 or M3 washers for the screws 1x Protection lens: http://www.banggood.com/Protective-Camera-Clear-Glass-UV-Lens-Cover-Case-Protector-For-GoPro-Hero-3-3-Plus-4-FPV-p-1006109.html?p=OF26119123132014119R