<BLOCKHEAD> Airblade Intrepid V2 bodykit by acroborg

thingiverse

Body Kit for Airblade Intrepid V2. Some notes: Camera pods are designed for specific configurations, including lens diameter and tilt. STL files have descriptive names, worth noting that 18mm lens includes the Runcam RC25G, fit to either the Turtle or a Split V2. 17mm lens includes the Runcam Eagle. Camera pods are designed to print with lens-side directly upward, no externally visible support material to deal with and you'll get the cleanest prints. Arm bumpers are designed specifically for the 3" Pro version, with slightly differences for 9mm and 12mm pattern motors. The rear bumpers feature hoops to retain antenna tubes, feel free to cut them off or print two of the front bumpers if unused. Rear assembly has space for antenna tubes for a 915mh long-range whip dipole antenna. I fly R9, should work fine with similar crossfire antennas. Also space for a large vbat capacitor and a commonly available rectangular "two leds and a buzzer" module. The VTX antenna can be mounted with an upright mast through the frame, or two options for out the back (when using antennas out the back, a capacitor can't be fit over the rear led-buzzer assembly, but easily tucked in the back of the quad. Use one part. Use the other. Mangle and modify as needed. Camera pods and rear assembly designed specifically for a 20mm stack height. Gopro Session pods are designed for a 15mm stack height. If you build up a quad with this kit, please share it at https://www.facebook.com/groups/brushlessmicros/ and give a shout (ben.wnuk)!