Blocks for displaying CD
thingiverse
These are blocks for displaying CD. By using this, you can easily fix the CD on the board. [design] There are 4 types of lower blocks and 1 type of upper block. The block size is W36xD36xH26mm. (lower + upper) The CD is fixed about 10 mm above the board. A 10mm circular dent is made to make it easier to apply the cushioning material for suppressing rattling. [how to use] -print the necessary blocks. -apply cushioning material to the blocks. -check the tightness of the screw holes in the blocks with M4 bolts. If you feel a little tight, try tapping. -make holes (4mm + α) to fix the lower blocks to a plate. -fix the lower blocks with M4 bolts or tapping screws. The recommended length of the bolt is about (plate thickness + 8 mm). -set the CDs. -fix the upper blocks with M4 CAP bolts. Recommended length is 10mm.
With this file you will be able to print Blocks for displaying CD with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Blocks for displaying CD.