BMO Raspberry Pi Case

thingiverse

THIS IS A DEMO VERSION, YOU CAN FIND THE FULL VERSION AT aguilarworkshop.com/product-page/bmo-case OR READ MORE ABOUT IT HERE aguilarworkshop.com/post/__bmo Major Features Raspberry Pi/Touch Screen Compatibility The three major components required to make this BMO work are a Raspberry Pi (I used a 4), this display from Amazon (Has touch screen functionality if you want it), and this HDMI L Adapter that is required to be able to connect the screen to the Pi in the tight confines of the BMO casing. The display comes with a 5V cable that can connect it to the Pi's 5V pin for power (with a male/female cable extensions), this means only the Pi power cable is required. Standardized Assembly All electronics as well as the back plate are designed to be fastened with M3 bolts. Power Cable and GPIO Opening There is an opening for the power cable as well as male/female GPIO cable extensions. BMO Stencil Included, is a stencil that centers itself on the case so that you can paint "BMO" on the case. No Supports Needed, Two Piece Design No Supports are necessary on any piece of this model. The case itself prints in two large parts.