BMW F 800 GS EVO tank bag SW-Motech Adapter

prusaprinters

<p>This model is suited to mount an SW-Motech tank bag on an BMW F 800 GS. This has no fuel tank in front of the seat.</p><p>The mount for the bag itself is licensed and can be bought in the SW-Motech shop.</p><p>&nbsp;</p><p>The holes of the mount must be 56mm apart.</p><p>&nbsp;</p><p>You need:</p><p>2x M5 Screw 48mm thread length</p><p>2x M5 Screw 51mm thread length</p><p>&nbsp;</p><p>Order the mount for your tank bag mounting plate from&nbsp;</p><p><a href="https://sw-motech.com/Produkte/Gepaeck/Gepaecktraeger/ADVENTURE-RACK/4052572050200.htm">https://sw-motech.com/Produkte/Gepaeck/Gepaecktraeger/ADVENTURE-RACK/4052572050200.htm</a></p><p>then:</p><p>&nbsp;</p><p>1. Print out all the parts as follows:</p><p>- 1x the part labeled as center</p><p>- 1x the right arm</p><p>- 1x the right arm mirrored</p><p>- 2x Spacer</p><p>- 2x the two parts for the rope attachment</p><p>&nbsp;</p><p>2. assemble all the parts like shown in the picture</p><p>3. take a flat and strong belt (ca. 1x15mm) and put it between the Metal part of the SW-Motech mount and the printed Base</p><p>4. Punch a small hole through the end and squeeze it between the clamping parts and put the screw through it. If necessary add a drop of glue.</p><p>5. If you wish to protect the paint of your bike, put a thin piece of foam(tape) or soft fabric on the part of the centerpiece which touches the plastic.</p><p>6. Bolt the assembly firmly to your bike</p><p>7. Tension the belts to press the Mount against the "tank" by pulling it between the metal plate and the printed part and tensioning the screws of the metal plate.</p>