Bolted Brake Pads For Kingsong S18 Electric Unicycle
thingiverse
The brake pads are bolted to the clamp part with two m3 screws. Please use lock nuts on the clamp part. No velcro type needed. There are 3 different brake pads available with different offsets. You can not be able to adjust the pad position with velcro on this design. +25mm offset pad is the backmost safe position for this bolted approach. If you need a pad further back you may need to try another approach. You can print the parts by using PLA or TPU alone or PLA-TPU combined. If you are printing PLA-TPU combined the mating surface should be at 4.00 mm above the bed. Make sure a few layers on top of the PLA section and on bottom of the TPU section have solid infill. Mirror on X-Axis for the opposite side.
With this file you will be able to print Bolted Brake Pads For Kingsong S18 Electric Unicycle with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bolted Brake Pads For Kingsong S18 Electric Unicycle.