Bomber Axial Mixed parts front and rear steering linkage and others

thingiverse

This project is to provide front or rear axle toe in or out adjustment while keeping some flex in the components instead of complete steel linkage. The servo connection is also tied directy to the steering knuckle instead of the wheel linkage for improve driving precision. I have included in the files variable length of linkage and an option for two adjustables set for front and rear axle. The turnbuckles used were AX31273 from axial. The parts have formed threads in them so the correct side of the turnbuckle must be use. The geometry of the parts enable full mouvement from left to right. The servo joint used were from tree parts AX80038 and AX1C3818. The measured length is between the two anchor points I will also include other parts has I complete them. Example: Lower shock spring plate Front lights wheel hub 12 mm of different height. Lion orange smart abs For the solid wheel link I have used: Front wheel_link_197mm Front servo 82 For the solid rear link I have installed: wheel_link_200mm Front servo 82mm Du to the small dimension of the ball joint, I had to increase the size up to 106% to get the best fit. That part will require a few iteration to match with the linkage. Layer thickness at 0.1 mm with the smart abs. Will be working on a replacement rear tank to install the receiver and improve the clearance with the top of the rear servo. Parts: AX31273 Ax80034 Ax1c3818 3mm threaded rods made from bolts 25 mm long