Borderlands Coaster

prusaprinters

<p>A coaster for Borderlands fans. It's 95mm in diameter and 4mm high. It's designed in two parts to allow you print in different colours, if you so choose. It looks great with an orange logo and grey or black body.</p> <p>The logo insert is 1mm thick. With a clean 3D print, the design just snaps together; glue is not required. When snapped in, the logo print should be a flush finish, giving a smooth and flat surface for that needed coffee as you work your way through a Borderlands level.</p> <p>I dare say that you can scale the STL to your liking to change the thickness or diameter.</p> <p>I have printed this design in PLA and PETG (my preferred filament) a couple of times and had excellent results.</p> <p>I hope you can find this print useful, too.</p> <h3>Print instructions</h3><p>I have printed this design in PLA and PETG (my preferred filament) a couple of times and had excellent results.</p> <p>My print is made in PETG 1.75mm 3DFillies black and orange filament, with 0.2mm layer height and 15% infill on a PRUSA I3 MK3S printer.</p>