Bose Soundlink Mini Clone for 1.5" 10W Drivers

thingiverse

My revised version of LaskaKit's Bose SoundLink Mini Clone I made the following changes to the STL file: 1. Added external control buttons 6x6x5mm push button switch 2. Removed Laskkit Text 3. Power switch changed to 12mm LED Switch 4. Type C Charging port instead of Barrel connector (Requires Type C 2S boost lithium charger board) 5. Added microphone hole 6. Changed passive radiator size to 35X70mm (inner diameter) Passive radiator. 7. Added hole for 3.5mm Audio Jack Some Hardware changes: 1. I used Qualcomm Bluetooth audio receiver instead of AIO Bluetooth receiver which allowed me to add external buttons and customize my own DSP. 2. I used a little PAM8610 15WX2 Audio Amplifier, but I recommend using TPA3110 Instead. I'm getting distortions on lower volumes with PAM board 3. I suggest Adding Capacitor with the value of 1.5mF or more in parallel to XL6009 output for a stable amplifier voltage. 4. I recommend using 2S BMS with balancing feature and is capable of outputting at least 10A. 5. For better portability I used a Type-C 2S charger board wired in parallel to the BMS output. One downside of my board is PD chargers won't work with this one and is only compatible with Type C to Type A Cable. Other notes: 1. Make sure to seal the holes properly while making sure the buttons are still working. 2. Use glue such as B-7000 or E-8000 for a good seal and also decent accessibility for repairs as IPA can dissolve the adhesive easily.