Bottle Clip for Belts

thingiverse

I needed a way to Carry a Bottle without a Bag and without annoying me while Carrying it. So i designed this Clip for 0.5L Bottles from the Coca-Cola Company. I went with their Bottles, because you can buy them anywhere. Even at Conventions. So it is easy to get a new one. Also their size is consistent. At least here in Germany. This Design should be able to be used with most of the Belts/Pants out there. I split the part for the Belt to let the loop of the Pants sit in between. Also i recessed the middle to make room for the loop between the Belt and the Object itself (a little improvement from my previous Design). With the Clip hold in Place by the loop, the Bottle should not Slide on the Belt. But feel free to ignore this Feature. That should be it with my instructions. I also added Pictures who should show the usage really good. Update: I noticed that my Material got softer and more Bendable over Time, so i've made a second version with a slightly longer Clip. This way, more Force is needed to get the Bottle out. Maybe it is necessary with the second version to file the Tips down to get it to function. Print Settings Printer: Prusa Mendel Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Notes: I designed it to be Printed without any Support. But the Material is pretty important. It needs to be strong and a little bit flexible to allow the Bottle to be Clipped in. I Printed mine with 910 Alloy form Taulman3D (http://taulman3d.com/alloy-910-spec.html). Every other Material should be possible too, but keep in mind that it has to carry the weight of the Bottle and it needs to resist the Forces with wich the Bottle is Pulled out/Pushed in.