Box with Revolving Tray

cults3d

*Note: Dear future people, by the time you read this, the link for the additional hardware needed may have expired, so I've added in the dimension and quantity needed so that you can source it from other places. (Usually AliExpress will still have the item but listed under another URL) Requires: M4 x 10mm Metal Dowel (1pcs)https://www.aliexpress.com/item/32871574546.html 4 (thickness of ballbearing) 10 (outer diameter) 4 (inner diameter) mm Ball Bearing (2pcs)https://www.aliexpress.com/item/32818720053.html 10mm (diameter) x 2 (height) mm Magnet (4 pcs)https://a.aliexpress.com/_m0gePXx Optional: 6 mm x 2.5 mm Self-adhesive rubber feet (4pcs)https://www.aliexpress.com/item/4000157727846.html Assembly: 1) Insert ball bearings onto each end of the dowel. 2) Install this assembly into the middle hole of the top and bottom piece of the 3D print. 3) Install the 4 magnets onto the remaining holes of the 3D print. Be mindful of the polarity. 4) Install the optional rubber feet at the bottom for added grip. Tips: Use glue if the pieces are too loose. File the 3D print it is too tight.