BOXING SANTA BIPED ROBOT 3D print model

cgtrader

These are the STL files for a 3D printable boxing santa biped robot please visit instructables.com , 3D Printed Boxing Santa Biped Robot for further information and assembly instructions. They have been arranged to print on a build surface of 150mm x150mm Print the Head, Forearms and back cover clips file in white Print the Body ,Clips and battery, Arms feet hat , Back cover files in red for the best Santa look. Ideally it is best to print with a layer height of .2mm but .3mm works as well. No supports are required for this print. I recommend printing with a 5mm wide brim of one layer heights spaced .1mm from the parts to ensure that the parts stick correctly to the print bed whilst printing, Infill 15%. Total print time 10 to 15h. The parts list is as follows: BODY x1 BACK COVER x1 FACE x1 HAT x1 ARMSERVO x2 ARM x2 ARM PIN x2 FOREARM x2 BATTERY HOLDER x1 BATTERY SERVO HOLDER x1 BATERY SERVO ARM ATTACHEMENT x1 FOOT DISK x2 BIG CLIP x2 SMALL CLIP x7 SMALL CROSS CLIP x2 TOTAL PARTS: 28