Brake Gear for Clicgear Golf Cart ver 3

prusaprinters

<p>This is version 3 and hopefully the final version of my Clicgear brake gear. Version 1 was modeled as closely as I could manage to the original from Clicgear. It proved to be too weak when 3D printed. I beefed up the cogs for version 2, and it worked better, but still broke too easily. Version 3 has been tested and modified for two golf seasons now and has held up well.</p> <p>Along with the beefier cogs, I also made the part that goes into the wheel the same size and shape as the holes that they fit into. This gives a good friction fit and a lot more plastic to take the abuse of forgetting to release the brake before trying to move the cart. I also did away with the little pins that broke off every time I tried to put the gear on the wheel and the groove in the center of the hub that doesn't seem to have any purpose (at least not on my cart).</p> <p>I included a picture of what was left of my factory gear that I broke. This is what started me designing my own version.</p> <h3>Print instructions</h3><h3>Category: Sport &amp; Outdoors Print Settings</h3> <p><strong>Printer Brand:</strong> FlashForge</p> <p><strong>Printer:</strong> <a href="http://amzn.to/2F3xKW3">Creator Pro</a></p> <p><strong>Rafts:</strong> Doesn't Matter</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> .2 mm</p> <p><strong>Infill:</strong> 100%</p> <p><strong>Notes:</strong></p> <p>I made the previous versions with ABS, but I had PLA loaded when I got ready to print the newest one, so thought I'd give it a try. I think it's going to work out great.</p>