British Columbia ( BC) EV Decal Frame

thingiverse

The horrible BC EV OK Sticker aka OKAY Decal. Save your paint, and use magnets. In my example, I'm using the frame on a 2021 Tesla Model Y Trailer Hitch Cover. I printed both the sticker base, and the outer frame. However, you can just print the sticker base. Supports are probably a good idea on the outer frame. On the Tesla Hitch Cover, I superglued two magnets (taking note of South and North poles of the magnets) to the back of the cover. Note, I also used a exacto knife on the back of the cover to remove parts of the small grid to let the magnets sit flush, however, its also not necessary. I then took two more magnets, the double sided tape, and mounted them inside the sticker base. For good measure, I also added superglue to the magnets before placing them in the sticker base. Mounted my EV OKAY decel to the top of the sticker base. The outer frame should snap into place. It is a fairly firm fit. If not worried about opening again, you could also superglue the outer to the base. *** Things you'll need: *** - Superglue - 4x Neodymium Disc Magnets 32mm x 3mm (1.26" x 1/8") [Amazon Link](https://www.amazon.ca/gp/product/B07QGYP16P/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1) - (Optional) Rear Hitch Cover - (Optional) Thin Felt Material - British Columbia EV OKAY DECAL / STICKER *** OPTIONAL INSTALL *** If you want to install on a painted surface or something you don't want to scratch, think about using superglue or hot glue to add a thin felt material to the side of the sticker base which has the magnets. This should stop the PLA and Magnets from having direct contact with your paint.