Broom Handle

Broom Handle

prusaprinters

<p>The handle on our kitchen broom has been broken for some time. I finally got sick of stabbing my hand on the sharp metal end. It is a 1 inch diameter broom stick.</p> <p>I used the regular model on mine. It fit, but it had a little wiggle room to it and still rotated. I dumped super glue in the gap before permanently placing it.</p> <p>I made a version with a larger inner shaft. It is still tapered at one end, but it was a little too tight for my broom. Probably because the end of the broomstick was a little deformed. Maybe someone else could benefit from it.</p> <h3>Print instructions</h3><h3>Category: Household Print Settings</h3> <p><strong>Printer:</strong> Original Prusa i3 MK2</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2</p> <p><strong>Infill:</strong> 20%</p> <p><strong>Notes:</strong></p> <p>Rotate the model so it stands upright. Not sure why it exports on its side.</p> <h3> Post-Printing</h3> <p>The outer shell is a little fragile until it is on a broomstick. My 4 year old broke my first attempt. You may add glue in between the gap for a more permanent placement.</p>

Download Model from prusaprinters

With this file you will be able to print Broom Handle with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Broom Handle.