Budmen Face Shield Cover

prusaprinters

<p>An attachable cover for the Budmen face shield design. Print time is approximately 3 hours on my settings, though removing supports brings it down to 2 hours (without speeding anything up). It can be placed on the headband of the Budmen face shield and should stay put, although it does take a bit of aligning and a bit of wiggling/pushing to get it on.</p> <p>See <a href="https://www.thingiverse.com/thing:4266411">https://www.thingiverse.com/thing:4266411</a> for a version with both the headband and cover combined.</p> <p>Budmen face shield files available at budmen.com.</p> <h3>Print instructions</h3><h3>Category: Other Summary</h3> <p>An attachable cover for the Budmen face shield design. Print time is approximately 3 hours on my settings, though removing supports brings it down to 2 hours (without speeding anything up). It can be placed on the headband of the Budmen face shield and should stay put, although it does take a bit of aligning and a bit of wiggling/pushing to get it on.</p> <p>See <a href="https://www.thingiverse.com/thing:4266411">https://www.thingiverse.com/thing:4266411</a> for a version with both the headband and cover combined.</p> <p>Budmen face shield files available at budmen.com.</p> <h3> Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> i3 MK2S</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.3mm</p> <p><strong>Infill:</strong> 10%</p> <p><strong>Filament:</strong> Any PLA <br/> <strong>Notes:</strong></p> <p>I printed with supports, but it's possible to print the model without supports (I haven't tested it on this design, but I have done similar overhangs on others).</p> <p>Printed with 2 perimeters. Model should be printed flipped vertically to minimize print time.</p> <h3> How I Designed This</h3> <p>Based off of <a href="https://www.thingiverse.com/thing:4241490">https://www.thingiverse.com/thing:4241490</a> by uzcaliber.</p>