Buratinu Midi 13000

thingiverse

”Haju-69” simply scaled up the inner wing section on its own. And even flew it. Since the part does not fit exactly, I redesigned the wing part. Meanwhile, he also tested and flew the plane with this part. https://www.youtube.com/watch?v=E73oMPo3tRg <iframe width="640" height="360" src="https://www.youtube.com/embed/E73oMPo3tRg" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> And many thanks Hans-Jürgen, for printing and testing it for me! This is way the Buratinu 1300 version was born  All other needed parts can be downloaded from Buratinu 1000 The special thing about this version also is that all parts of the wing, i.e. W3 to W5 as well as the elevons are identical to the original Buratinu version which are included here: https://www.thingiverse.com/thing:3047415 The wingend W6 is smaller. You must take it from the Buratinu Midi 1000 https://www.thingiverse.com/thing:4280142 Or in case you can print larger, you can take the parts from here: https://www.thingiverse.com/thing:3857570 The Buratinu 1300 uses the same fuselage as the Buratinu Midi. So you have to take it from here: https://www.thingiverse.com/thing:4280142 Specifications airfoils: own design wing span: 1300 mm wing chord: 284/140 mm CoG: 187 mm from rear edge of the fuselage overall weight: 730 g (LW PLA) wing area: 27,7 dm² wing loading: 26,4 g/dm² motor: Turnigy SK3-2836/1500 folded propeller: 8 x 6" battery: 1000 mAh 3S motor camber: -4° Print Settings Wings perimeter_extrusion_width = 0.5 layer_height = 0.25 perimeters = 1 fill_density = 0% bottom_solid_layers = 4 top_solid_layers = 4