C270 Camera Mount

thingiverse

I looked at a lot of camera mounts and wanted one that was very simple that looked good and did not require taking the camera apart. Granted this design does have a lot of support material (used auto generate supports in Simplify3D), but it is really easy to remove and reinstall the camera in seconds and you can still use the tilt function of the original camera base. 03/31/2018 - Update: The previous design of the support arm failed after about 100 hours of printing due to vibration and the mounting post (on the support arm being to narrow). I increased the diameter of the post and remodeled it to go all the way through the base. The new version of the support arm is v44 (Much, much stronger). This also required me to redesign the camera mount (new version is v14) by increasing the diameter of the mounting tube to fit on the new support arm. C270 Camera Mount Support Arm: https://www.thingiverse.com/thing:2828799 Notes: 1.) The "v14" version of the stl may need to be reoriented before you print (top of mount should be on the print bed aka: mounting tube up). 2.) The attached gcode file was made using Simplify3D, setup for the Prusa MK3, includes the supports, and temperatures are set for eSUN 1.75mm Glass Light Blue PLA.