Cable Chain Mount
thingiverse
This is a rework of the cable chain mount on the Tronxy X5S, but could be used on any core X Y cube. When receiving the new X5S release the connector block has been removed and the cables are soldered together. When Tronxy did this they made the cables too short, and a complete rewire is required. This mount has a cable management box built in to correct this issue. There is space to install a solder tag strip inside, and as you see in the photo I also used a terminal block to be used for the hot end cables to make it easy switch out. I have also added a boom arm to keep the Bowden tube away from the Y stepper on the Tronxy plus it helps with the tube sagging and fouling with the cable chain. You will need M2 Screws 4 x 5mm M3 Screws 4 x 10mm I used computer case Blanking plate screws M3 nut and bolt 40mm cable strain relief.
With this file you will be able to print Cable Chain Mount with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Cable Chain Mount.