Cable management for single-core Cable

prusaprinters

<p>These brackets are for new single-core cables that are rolled up in a carton. With these brackets, empty Prusment rolls can easily be converted into cable reels and no expensive finished product is necessary. The holders can be fixed on the wall or on a mobile trolley. The rolls are centered and supported, so that the cables can be unrolled quickly.</p> <h3>Print instructions</h3><p>For a bracket you need:</p> <p>1x wall mount<br/> 1x axis<br/> 1x screw<br/> 2x nuts<br/> 2x 608 ZZ bearings<br/> 1X middle part<br/> 1x empty Prusament roll</p> <p>The holder is designed for standard single-core cables up to 4 ^ 2mm.</p> <p>Assembly:</p> <ol> <li><p>Disassemble the Empty Prusament Roll into its individual parts. (You can put the cardboard roll away as it is not needed)</p> </li> <li><p>Put the middle part on half of the Prusament roll until it is firmly seated.</p> </li> <li><p>Put the already rolled up cable on the Prusament roll with the middle part.</p> </li> <li><p>Close the roll with the second half of the Prusment roll.</p> </li> <li><p>Screw a nut onto the screw until it is in line.</p> </li> <li><p>Put the Prusament roll with the cable on the screws and fix it with the second nut.</p> </li> <li><p>Insert two bearings in the recesses of the screw</p> </li> <li><p>Put the axle through one bearing until it is through the other bearing.</p> </li> <li><p>Put the whole roll with the axle on the holder.</p> </li> </ol> <p>Finished!</p> <p>Now you can unroll the cable easily</p> <p>For print:</p> <p>Mterial:PETG<br/> Infill: 20%<br/> Layers high. 0.2 mm<br/> Support: no</p> <p>This bucket holder costs little compared to ready-made solutions and you can use old filament rolls and do not have to discard them.<br/> A comparable stand costs between € 4,000 and € 6,000 for 40 rolls. The self-made stand with the entire printing material and the frame does not even cost 500 € for 80 rolls.<br/> So it is a very inexpensive solution that also looks great.</p> <p>The screw is based on the "Universal Auto-Rewind Spool Holder (MM)"<br/> <a href="https://www.prusaprinters.org/de/prints/168-universal-auto-rewind-spool-holder-mm">https://www.prusaprinters.org/de/prints/168-universal-auto-rewind-spool-holder-mm</a></p>