cable management mount - for 2020 aluminum

cults3d

This is a design request by someone. It is to fit a cable management sleeve with the diameter roughly 1 1/4". I printed it out and tested it myself. It comes in 4 parts, base, top clasp, bottom clasp and gear. If you are having a little bit of an issue putting the gear on (too tight). Place the gear into the base first, and then insert the bottom pushing it through the gear. The holes on the top of the base is to tighten down the bottom piece with a M5 bolt at 10mm length, I made that diameter of the hole to be 5.2mm. The purpose of the gear is to easily rotate the clasp in the direction you need with a easy locking mechanism. You can mount it to a piece of 2020 extrusion aluminum with M5 bolts. I am also including the Fusion 360 file, so you can edit it as needed. The distance to where you mount it on the aluminum and the center of the clasp is roughly 3.29" (83.8mm). UPDATE: Revision 04-05-2020. Per request, I have uploaded another version for the top and bottom clasp. I ended up rounding the inside and outside of both clasps. Look for the revision STL files.