Caddx Beetle FPV camera housing for Parrot Mambo drone
thingiverse
I used this casing to hold the Caddx Beetle FPV camera on top of the Parrot Mambo drone You can buy the camera here for 13$: https://us.banggood.com/Wholesale-Warehouse-Caddx-Beetle-V1-5_8Ghz-48CH-25mW-CMOS-800TVL-170-Degree-Mini-FPV-Camera-AIO-LED-Light-For-RC-Drone-wp-Usa-1369744.html?akmClientCountry=FR&rmmds=myorder I printed both top and bottom part upside down with supports for the bottom part. Put the camera into the bottom part, taking the wires inside the hole on the back and cover it with the top part. You can glue both parts or use a small rubber to maintain them. Then, drill two holes to connect +5V and +GND from the Mambo connectors to the FPV camera, using wires with a drop of glue to mainting them still. Put the camera in its housing on top of the Mambo, and use 5.9GHz receiver googles to enjoy FPV races with you Mambo ;)
With this file you will be able to print Caddx Beetle FPV camera housing for Parrot Mambo drone with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Caddx Beetle FPV camera housing for Parrot Mambo drone.