CalCuCy - Calibration Cube and Cylinder

thingiverse

I use the cube and cylinder as testing tools to calibrate my custom made printers and verify that the bed is levelled properly. The printed size should match 25mm on each axis as closely as possible. If the printed size isn't correct, check your firmware and axis settings. When using Marlin firmware like I do, it's easy to change parameters with the M92 command. To save the new settings in the EEPROM, use the M500 command. To see the current settings, use the M501 command and look for the M92 line. Here are some essential commands: M501 retrieves the current firmware settings; check the M92 line. M92 X187.50 Y187.50 Z800.00 E185.00 adjusts the current settings. M500 stores the new settings in the firmware.