Camera Mount with Cable Guide -Logitech C922 Pro

prusaprinters

<p>Camera Mount for 25.4 x 25.4 mm aluminium extrusion with cable guide to keep the cable tidy, protected, and out of the way. This is a good snap fit onto the extrusion. I designed the original for use around the Logitech C922 Pro but it works with any other camera with a standard tripod mount. The hole for the mounting screw is deliberately undersized to be drilled out per best customisations. &nbsp;The current mounting screw hole is designed around a M4 cap bolt.&nbsp;</p><p>The print is not an overly tight fit surrounding the camera, I deliberately ensured an overall 1.125mm gap which gets swallowed up. I glued a piece of felt front and rear to cushion any printing vibrations.</p><p>I used PET, PLA works fine.</p><p>Additional:</p><p>2x M3 x 14 mm Cap Screws<br>2x Locking Nuts (M3 x 4mm)&nbsp;<br>Felt or like soft material</p><p>N.B. I use M3 x 12mm Cap Head Screws to give a refined tidy finish, they have enough thread but 14-15mm would be easier to wind on initially.</p><p><br>If you like this please consider buying me a coffee: <a href="https://www.buymeacoffee.com/missionrea9">https://www.buymeacoffee.com/missionrea9</a></p><p>&nbsp;</p><p>Edit: added version without cable guides as requested</p><p>Edit: added camera base for adjustability as requested.&nbsp;</p><p>N.B. I made the camera base with square corners as opposed to round corners to facilitate a better tighter grip. When testing I found installing the camera base into the bracket asap after printing gives an almost permanent adhesion. The tolerances are extremely tight making for a very secure bond. No screws required if inserted while still warm and a little malleable.</p><p>&nbsp;</p><p>&nbsp;</p><p>Find the Logitech C922 Pro Privacy Screen here: <a href="https://www.prusaprinters.org/prints/148065-logitech-c922-pro-privacy-shield">https://www.prusaprinters.org/prints/148065-logitech-c922-pro-privacy-shield</a></p><p>&nbsp;</p><p>Fine version 2 here:<br><a href="https://www.prusaprinters.org/prints/152151-camera-mount-with-cable-guide-v2">https://www.prusaprinters.org/prints/152151-camera-mount-with-cable-guide-v2</a></p><p>&nbsp;</p><p>&nbsp;</p>